Skip to Main Content

907300 - Millermatic 350P Miller Mig Welder pack

Packaging: 1 per each

Sorry, product has been discontinued by the vendor.

OVERVIEW

Miller® Millermatic 350P 200/230/460V 60Hz 1/3Ph

First single- or three-phase power Millermatic that welds material from 22 gauge to 1/2 in thick in a single pass. Perfect for fabrication, manufacturing, maintenance and repair.

Pulsed-MIG Advantage: Whether welding aluminum, steel or stainless steel, improving productivity by 30, 50 or 100% and saving tens of thousands of dollars are typical results when switching to Pulsed-MIG with the Millermatic 350P. Millermatic 350P Autobody Aluminum Package: The automotive industry is trending to aluminum frames and body panels to improve performance and fuel mileage. Welding thin gauge aluminum creates problems with warping, distortion and burn through. The Millermatic 350P Autobody Aluminum Package makes it easy to setup, use and make quality aluminum repairs. Aluminum Pulse Hot Start: Automatically provides more arc power to eliminate a "cold start" that is inherent with aluminum starts. Gun-On-Demand: Miller's Gun-On-Demand feature allows you to use either a standard MIG gun, a Spoolmatic 15/30A spool gun or any other Miller push-pull gun without flipping a switch. The machine senses which gun you are using when you pull the trigger. SharpArc: Optimizes the size and shape of the arc cone, bead width and appearance and puddle fluidity. Line Voltage Compensation (LVC): Line Voltage Compensation keeps output of the power source constant regardless of fluctuation in input power ± 10%. Fan-On-Demand™: Cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through machine.
Additional Information
Packaging Description:1 per each
Weld Process:MIG
Brand:Miller
Voltage:230
Amps:300
Duty Cycle:60
Watts:n/a
Cutting Capacity:n/a

INCLUDED

  • .035/.045 in (0.9/1.2 mm) reversible V-groove drive rolls (order U-groove drive roll kits for aluminum welding)
  • 10 ft (3 m) Industrial power cord (without plug) for single- or three-phase
  • 10 ft (3 m) work cable with clamp
  • Argon mix regulator/flow meter
  • Bernard® Q300 15 ft (4.6 m) MIG gun with extra Centerfire™ contact tips
  • Extra contact tips
  • Factory-installed gas solenoid
  • Factory-installed, low-mounted running gear/cylinder rack
  • Millermatic 350P power source

CATALOGUE & SPEC SHEETS

Miller Catalog
Spec Sheet