Skip to Main Content

500554 - Miller Hobart Handler 190 230Vac 60Hz

Packaging: 1 per ea
$1,521.09/ea

Usually ships within 3-5 business days

OVERVIEW

Hobart Handler® 190 MIG Welder

An industrial performance welder that is spool gun ready for aluminum. Runs on 230V input power, welds up to 5/16 in. mild steel and is flux-cored or MIG ready.

7 voltage settings, with infinite wire feed speed control: Allows you to fine control the output parameters for improved arc performance with less spatter for a better bead appearance and less clean up. Accepts uncomplicated, easy-to-install direct plug-in SpoolRunner 100 spool gun: Allows you to weld aluminum with enhanced feed ability and reduction of 'bird-nesting''.' Integrated spool gun control circuitry is standard: Eliminates your need for an additional control box or adaptor to connect the SpoolRunner 100 spool gun. Door Chart with initial settings: You are able to quickly reference initial settings for different wires, gases, materials, and thicknesses. Provides you a quick starting point whether you are a novice or professional. Built-in contactor: Keeps wire electrically “cold” until trigger is pulled which gives you ease of use and keeps you safe. Industrial cast aluminum wire drive system: Durable wire feed provides you professional performance Convenient polarity changeover: Easier and quicker for you to change polarity between solid or tubular wire. Quick Select drive roll: Less of your time consumed in setup by offering three grooves – two for different size solid wire and a third for flux-cored wire. Short circuit protection: Protects unit against current overload. Self- resetting thermal overload protection: Protects power transformer from thermal overload to provide you maximum reliability. Self-resetting motor protection: Protects wire feed system from overload, you won't need to change or reset the circuit breaker button.
Additional Information
Packaging Description:1 Per Ea

INCLUDED

  • .030 in. (0.8mm) contact tips
  • 10 ft. (3 m) work cable with clamp
  • Built-in gas solenoid valve and dual-gauge regulator with gas hose.
  • Comfortable 10 ft. (3 m) H100S4-10 gun
  • Comfortable 10 ft. (3 m) HR-100 gun
  • Owner's manual with installation, operation and maintenance guidelines
  • Power cord with plug
  • Quick Select™ drive roll for .024 in (0.6mm) or .030/.035 in. (0.8/0/9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire
  • Sample spool of .030 in (0.8mm) self-shielding flux-cored wire
  • Spool hub assembly accommodates 4 or 8 in. spools
  • Welding guide and material thickness gauge

APPLICATIONS

  • MobileFabrication
  • WeldingProjects

CATALOGUE & SPEC SHEETS

Spec Sheet