Skip to Main Content

K4797-1 - Lincoln Magnum PRO AL FC 225 Push-Pull Gun, 15ft, 12-Pin, Air Cooled

Packaging: 1 of each
$10,168.88/ea

Usually ships within 3-5 business days

SKU: K4797-1 Categories: ,

OVERVIEW

Lincoln Electric Magnum PRO AL FC 225 Push-Pull MIG Gun (K4797-1)

The Lincoln Electric Magnum PRO AL FC 225 (K4797-1) is a specialized air-cooled push-pull MIG gun designed to address the specific challenges of aluminum welding. Rated for 225 amps at a 60% duty cycle, this tool is engineered for fabrication environments where consistent wire feeding and arc stability are critical. The core innovation in this model is the Fixed Conduit (FC) liner system. Unlike traditional flexible liners that can cause soft aluminum wire to buckle or shave, the rigid fixed conduit provides a smooth, straight path for the wire, significantly reducing friction and feeding failures over the 15-foot cable length.

Mechanically, the gun integrates a powerful internal drive motor that works in synchronization with the welding machine's wire drive. This push-pull configuration ensures that the wire is actively pulled through the conduit rather than just being pushed from the feeder, which is essential for feeding softer aluminum grades like 4043 and 5356 without bird-nesting. The gun comes equipped with a 12-pin connector, making it directly compatible with modern Lincoln Electric power sources. For older or different equipment configurations, it can be adapted to a 7-pin receptacle using the optional K2910-2 adapter.

Operational efficiency is enhanced through the Quick Wire Feed Speed (WFS) adjustment dial located conveniently at the base of the handle, allowing operators to fine-tune parameters without returning to the power source. The gun utilizes Lincoln's Magnum PRO expendables, which feature Copper Plus contact tips with a larger mass for better heat dissipation and anti-seize threads to prevent tip freezing. The ergonomic handle design includes a 360-degree rotatable gun tube, providing welders with the flexibility needed to access complex joints and tight corners. The package includes the gun, 3/64" front-end expendables, an idler roll, and the necessary liners to get started immediately.

Additional Information
Packaging Description:1 of each
Brand:Lincoln, Magnum
Amps:225amp
Length :15 ft
Front End:Magnum
Back End:Lincoln
Wire Type:Aluminum
Wire Size:3/64
Torch Type:Air Cooled, Push-Pull
Duty Cycle:60% @ 225A
Connection Type:12-Pin Lincoln Style
Wire Diameter Range:.035" - 1/16"
Cooling Method:Air Cooled

INCLUDED

  • Magnum PRO AL FC 225 Air Cooled Push-Pull MIG Gun (15 ft)
  • 3/64" (1.2 mm) Front-End Expendables
  • Idler Roll
  • Gun Tube Liner
  • 45-Degree Gun Tube
  • Fixed Conduit Liner

APPLICATIONS

  • Aluminum Metal Fabrication
  • Automotive Body Repair
  • Trailer Manufacturing
  • Sign Fabrication
  • Shipbuilding and Marine Repair
  • Light Industrial Maintenance

FAQ

The Magnum PRO AL FC 225 is rated at 225 Amps at 60% Duty Cycle using CO2 or Mixed Gas.

Yes, it uses a Fixed Conduit liner system which is a rigid, all-in-one liner designed specifically to improve the feeding of soft aluminum wire.

The gun is rated for wire sizes ranging from .035" (0.9 mm) to 1/16" (1.6 mm). It comes standard with 3/64" expendables.

The gun has a built-in motor that pulls the wire from the spool while the welder's feeder pushes it. This synchronization prevents the wire from buckling inside the liner.

Yes, but you will need the optional K2910-2 Adapter (12-pin to 7-pin) to connect this 12-pin gun to a 7-pin receptacle.

Yes, the gun tube can rotate 360 degrees, allowing you to adjust the angle for better access to different welding joints.

It uses Lincoln Electric Magnum PRO expendables, including KP2744 series contact tips and KP2742 series nozzles.

The K4797-1 is an air-cooled welding gun.

CATALOGUE & SPEC SHEETS

Spec Sheet