Home Shop 5/16 Inch Wire Rope Clip Cable Clamp
Awaiting product image

501001006 - 5/16 Inch Wire Rope Clip Cable Clamp

Packaging: 1 of each
$32.00/ea

Usually ships within 3-5 business days

SKU: 501001006 Categories: ,

OVERVIEW

Technical Overview: 5/16" Closed Grip Wire Rope Clip

The 5/16" Closed Grip is a fundamental component in industrial rigging and cable management, designed specifically to secure the ends of 5/16-inch diameter wire rope or cable. Commonly referred to as a wire rope clip or cable clamp, this device is engineered to clamp the loose end of a length of wire rope back upon itself to form an eye or loop. This mechanical termination is essential for creating attachment points for hooks, shackles, or turnbuckles in various MRO and construction applications.

Constructed from durable steel and finished with a zinc coating, this grip offers significant resistance to oxidation and corrosion, making it suitable for both indoor industrial environments and outdoor field use. The assembly consists of a U-bolt, a saddle (or bridge), and two securing nuts. The saddle is grooved to cradle the wire rope, ensuring that the clamping force is distributed evenly without severely deforming the cable strands, provided the clip is installed correctly. Proper installation requires the saddle to be placed on the "live" end of the rope (the load-bearing side), while the U-bolt sits on the "dead" or short end, following the industry rule: "Never saddle a dead horse."

This 5/16" grip is sized precisely for cables of that nominal diameter. Using a clip that is too large can result in slippage and failure under load, while an undersized clip may damage the cable. For critical applications, multiple clips are typically required to achieve the necessary holding power and efficiency rating. This product is a staple in maintenance, repair, and operations (MRO) inventories, providing a versatile solution for securing guy wires, hanging static loads, or repairing winch cables.

Key Specifications:

  • Nominal Size: 5/16 inch
  • Material: Steel with Zinc Plating
  • Components: U-bolt, Saddle, 2 Nuts
  • Application: Wire rope termination and loop creation
Additional Information
Packaging Description:1 of each, 1-of-each
Item:Grip
Brand:Generic, n/a
Cable Size:5/16"
Material:Zinc Plated Steel
Type:Cable Clip, Wire Rope Grip

INCLUDED

  • 1 x 5/16" Closed Grip Wire Rope Clip
  • 1 x U-Bolt
  • 1 x Saddle
  • 2 x Securing Nuts

APPLICATIONS

  • Creating load-bearing eyes in 5/16" wire rope
  • Securing guy wires for masts and towers
  • Repairing winch cables and hoist lines
  • Installing safety cables and guardrails
  • General rigging and material handling in industrial shops

FAQ

Always follow the rule 'Never saddle a dead horse.' The saddle (the bridge part) must be placed on the live (load-bearing) end of the rope, while the U-bolt goes over the dead (short) end.

For standard rigging applications, it is generally recommended to use a minimum of two to three clips to ensure full holding power, though specific safety codes may require more depending on the load.

No, wire rope clips are size-specific. Using a 5/16" clip on smaller or larger cable can lead to slippage or cable damage. Always match the clip size to the wire rope diameter.

Standard malleable wire rope clips are typically not recommended for permanent overhead lifting. For critical overhead lifting applications, forged clips or swaged sleeves are often required by safety standards.

You will need a standard wrench or socket set that fits the nuts on the U-bolt. A torque wrench is recommended to ensure the nuts are tightened to the manufacturer's specified torque.

Yes, U-bolt style wire rope clips can generally be reused if they are not damaged, but the wire rope itself may be deformed and should be inspected before re-termination.

This grip is made of steel with a zinc plating to provide corrosion resistance.

Related products